How to Repair Holes In Concrete Floors with Flowpatch

𝗛𝗼𝘄 𝘁𝗼 𝗥𝗲𝗽𝗮𝗶𝗿 𝗛𝗼𝗹𝗲𝘀 𝗜𝗻 𝗖𝗼𝗻𝗰𝗿𝗲𝘁𝗲 𝗙𝗹𝗼𝗼𝗿𝘀 𝘄𝗶𝘁𝗵 𝗙𝗹𝗼𝘄𝗽𝗮𝘁𝗰𝗵 – 𝗦𝘁𝗲𝗽-𝗯𝘆-𝗦𝘁𝗲𝗽 𝗚𝘂𝗶𝗱𝗲 It doesn’t take long for a floor with minor damage to deteriorate. The worse it gets, the more costly it becomes, and the more downtime required to carry out the repair. Carry out your repairs with ease. Watco Flowpatch is quick, simple and can be used by anyone, anywhere. Our reinforced cement and polymer powder formulation is extremely easy to use – just sweep away any dirt or debris, add water to the mortar, mix thoroughly and pour into the hole. This quick-setting formula will accept light traffic in just 30 minutes or forklifts in two hours! 📖 𝗟𝗶𝗻𝗸𝘀 𝗮𝗻𝗱 𝗿𝗲𝘀𝗼𝘂𝗿𝗰𝗲𝘀: - Watco Flowpatch https://www.watco.co.uk/products/watco-flowpatch - Watco Flowpatch Repair Bundle https://www.watco.co.uk/products/watco-flowpatch-repair-bundle-pack - Free Guide to concrete floor repairs https://www.watco.co.uk/help-advice/guides-and-resources/ebooks/guide-to-concrete-floor-repairs 𝗤𝘂𝗶𝗰𝗸 𝗹𝗶𝗻𝗸𝘀: • 00:00 Start • 00:11 What you will need • 00:22 Step 1, Preparation • 00:40 Step 2, Mixing • 01:30 Step 3, Application of Flowpatch By the end of this video, you'll know exactly how to repair concrete holes with Watco Flowpatch. ✨ 𝗗𝗼𝗻'𝘁 𝗳𝗼𝗿𝗴𝗲𝘁 𝘁𝗼 𝗹𝗶𝗸𝗲, 𝗰𝗼𝗺𝗺𝗲𝗻𝘁, 𝗮𝗻𝗱 𝘀𝘂𝗯𝘀𝗰𝗿𝗶𝗯𝗲 𝗳𝗼𝗿 𝗺𝗼𝗿𝗲 𝘁𝗶𝗽𝘀 𝗮𝗻𝗱 𝘁𝘂𝘁𝗼𝗿𝗶𝗮𝗹𝘀!✨ 𝗔𝗯𝗼𝘂𝘁 𝗪𝗮𝘁𝗰𝗼 Our wide range of industry-leading products and professional services means we can repair, refurbish, protect and waterproof your building and its surfaces – from top to bottom, inside and out. Formulated and tested for industrial applications, whether you’re painting a warehouse, factory, logistics centre or a garage floor, you can be confident of a long-lasting, professional finish, every time. Our friendly team of technical advisors are on-hand to help you before, during and after your projects. With expert know-how, they can provide free quotes or samples, product and application guidance. 𝗖𝗼𝗻𝘁𝗮𝗰𝘁 𝘂𝘀: Telephone: 01483 418 418 Email: [email protected] Online form: https://www.watco.co.uk/contact-us ______________________________________________________________ 𝗧𝗿𝗮𝗻𝘀𝗰𝗿𝗶𝗽𝘁: How to Repair Holes In Concrete Floors with Flowpatch What you'll need: - Brush - Electric Drill fitted with Mixing Blade - Bucket or Watering Can - Steel Float - Nitrile Gloves STEP 1 – PREPARATION - Thoroughly clean the surface to ensure it is free of dust, dirt and loose material. - For dirty or oily surfaces an industrial degreaser such as Watco Concroff or Watco Bio-D should be used. STEP 2 – MIXING - Remove the bag of powder from the bucket. - Add water back into the bucket. - Gradually add the powder to the water. - Use a ratio of 1 parts clean, cold water to 3 parts powder. - Mix thoroughly to achieve an evenly coloured, smooth and pourable consistency. - Mix near to the area to be repaired as the product will harden quickly and must be used within 5-10 minutes. STEP 3 – APPLICATION - Pour the mixture into the damaged area. - Watco Flowpatch can be applied to any depth between 5mm - 100mm. - Flowpatch is self-levelling, so requires minimal effort. - If required, smooth with a trowel. - Ready for foot traffic in just 30 minutes and heavy traffic in just 2 hours. 𝗪𝗔𝗧𝗖𝗢 𝗙𝗟𝗢𝗪𝗣𝗔𝗧𝗖𝗛 Makes fast work of heavy duty concrete floor repairs.